December 5, 2023
Gold: $2,023.35
Palladium: $965.00
Platinum: $908.00
Silver: $24.27
Menu
DM03
Implant Model (grey)
Dental Model DM12 is the ideal choice for printing separated models for crown and bridge application. DM12 optimizes model precision through its lower elasticity and higher flexural modulus compared to the previous DM11. The hardness and mechanical properties of the cured resin allows the DM12 to resist abrasion during seating and finishing for crown and bridge cases, ensuring a perfect fit every time. The yellow color offers maximum detection of margin lines and adjacent contours, and cleanup is easy thanks to the low viscosity of the resin.
Low viscosity, high stability03
Physical Properties – Liquid Status
| Color | Yellow |
| Viscosity @25℃ | cps | 295 |
| Wavelength | 405nm |
Mechanical Properties – Post Cured Parts
| Property | Value | Test Method |
| Hardness | Shore D | 81 | ISO 868 |
| Elasticity Modulus | Mpa | 1404 | ISO 527 |
| Tensile Strength | Mpa | 29 | ISO 527 |
| Elongation at break | % | 11 | ISO 527 |
| Flexural Modulus | Mpa | 1418 | ISO 178 |
| Flexural Strength | Mpa | 48 | ISO 178 |
OD01
Ortho Model
Ortho model OD01 is an excellent choice for printing models for the fabrication of aligners and orthodontic applications. The high heat resistance and hardness of OD01 allows for the cured models to withstand abrasion and maintain accuracy over multiple uses.
High heat resistance, hardness
Physical Properties – Liquid Status
| Color | Brown |
| Viscosity @25℃ | cps | 426 |
| Wavelength | 405nm |
Mechanical Properties – Post Cured Parts
| Property | Value | Test Method |
| Hardness | Shore D | 82 | ISO 868 |
| Elasticity Modulus | Mpa | 2003 | ISO 527 |
| Tensile Strength | Mpa | 46 | ISO 527 |
| Elongation at break | % | 8 | ISO 527 |
| Flexural Modulus | Mpa | 2237 | ISO 178 |
| Flexural Strength | Mpa | 82 | ISO 178 |
DC12
Crown, Bridge, Partial Framework
Dental Cast DC12 is a printable wax-like photopolymer specially developed for investment casting. DC12 is the ideal resin choice for dental applications such as crown and bridge casting and cast partial dentures frameworks. DC12 burns out clean and can also be used in pressed ceramic applications.
Low deformation, clean burnout outcome
Physical Properties – Liquid Status
| Color | Green |
| Viscosity @25℃ | cps | 105 |
| Wavelength | 405nm |
Mechanical Properties – Post Cured Parts
| Property | Value | Test Method |
| Hardness | Shore D | 82 | ISO 868 |
| Elasticity Modulus | Mpa | 1296 | ISO 527 |
| Tensile Strength | Mpa | 22 | ISO 527 |
| Elongation at break | % | 2.3 | ISO 527 |
| Flexural Modulus | Mpa | 1533 | ISO 178 |
| Flexural Strength | Mpa | 39 | ISO 178 |
SG01
Surgical Guide, Ortho Guide
Surgical Guide SG01 is a clear and biocompatible resin intended for printing dental surgical guides. It is certified by FDA as Class I medical instrument and meets ISO 10993 standards, making it ideal for customized, non-implantable use with body contact limited to 24 hours. SG01 is a rigid polymer with minimal flex, which allows it to maintain its form during dental surgeries.
Biocompatible, transparent
Physical Properties – Liquid Status
| Color | Transparent |
| Viscosity @25℃ | cps | 527 |
| Wavelength | 405nm |
Mechanical Properties – Post Cured Parts
| Property | Value | Test Method |
| Hardness | Shore D | 84 | ISO 868 |
| Elasticity Modulus | Mpa | 1873 | ISO 527 |
| Tensile Strength | Mpa | 43 | ISO 527 |
| Elongation at break | % | 12.2 | ISO 527 |
| Flexural Modulus | Mpa | 2047 | ISO 178 |
| Flexural Strength | Mpa | 81 | ISO 178 |
GM11
Gingiva Mask
Gingiva Mask GM11 is an excellent choice for replicating gingiva contours for digital implant cases. GM11 is a flexible material that can assist in planning the emergence profile for digital implant restorations.
Flexible, gingiva color
Physical Properties – Liquid Status
| Color | Transparent Pink |
| Viscosity @25℃ | cps | 1179 |
| Wavelength | 405nm |
Mechanical Properties – Post Cured Parts
| Property | Value | Test Method |
| Hardness | Shore D | 70 | ISO 868 |
| Elasticity Modulus | Mpa | N/A | ISO 527 |
| Tensile Strength | Mpa | N/A | ISO 527 |
| Elongation at break | % | N/A | ISO 527 |
| Flexural Modulus | Mpa | N/A | ISO 178 |
| Flexural Strength | Mpa | N/A | ISO 178 |
TR01
Custom Tray
Tray TR01 is a biocompatible material with a high elastic modulus making it an outstanding choice for printing custom trays. The high elastic modulus allows the printed tray to resist flexion under high pressure leading to more accurate impressions. Its biocompatibility makes it safe for short term use in the mouth.
Biocompatible, high stability
Physical Properties – Liquid Status
| Color | White |
| Viscosity @25℃ | cps | 362 |
| Wavelength | 405nm |
Mechanical Properties – Post Cured Parts
| Property | Value | Test Method |
| Hardness | Shore D | 87 | ISO 868 |
| Elasticity Modulus | Mpa | 1981 | ISO 527 |
| Tensile Strength | Mpa | 45 | ISO 527 |
| Elongation at break | % | 4.9 | ISO 527 |
| Flexural Modulus | Mpa | 2895 | ISO 178 |
| Flexural Strength | Mpa | 93 | ISO 178 |
Certification
| Materials | CE | RoHS | REACH | FDA | CFDA/ NMPA | CFDA/ NMPA |
| DM12 | – | X | X | – | class I | – |
| OD01 | – | X | X | – | class I | – |
| DC12 | – | X | X | – | class I | – |
| SG01 | class I | X | X | class I | class I | X |
| GM11 | – | X | X | – | class I | – |
| TR01 | class I | X | X | class I | class I | X |
Delivery & Storage
| Net Weight | 1 KG |
| Storage Temperature | 5℃-35℃ |
| Storage Humidity | 5%～90%RH |
| Working Temperature | 20℃-30℃ |
| Working Humidity | 30-70%RH |
| Bottle Size mm | D90*225 |
| Package Size mm | 125*125*265 |
| Gross Weight | 1.1 KG |
